Description

From the brand

Product Description

NOTE: Please confirm if your device supports a TV or set-top box with optical or coaxial interface for output. Amplifier with RCA interface for input, audio system with 3.5mm interface, wired headphones, or wireless TV headphones

Do not use RCA lines longer than 10 meters. It will cause sound delay.

The DAC only supports PCM input format, other formats will cause noise

Do not use the output device USB port to Charge this DAC converter. It will cause static noise

Do not use RCA lines longer than 10 meters. It will cause sound delay. 5 meters of pure copper RCA wire is recommended

Do not use a plug less than 1A. It will cause sound delay. This DAC need standard DC 5V/1A power supply

Supports sampling rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz.

24-bit SPDIF incoming bit stream on left and right channels.

Gold-plated input & output Gold Plated interface to reduce signal transmission loss.

Aluminum Metal case,lightweight and compact.Good anti-interference function makes the sound pure and clear

Support Audio Format: PCMSignal-to-Noise Ratio: 105DBSeparating Degree（1KHZ）: 94DBResponse Frequency: 20Hz~20KHz -0.2db

Connection and Operation:

Connection and Operation:

1. Use the RCA cable to connect PROZOR DAC to stereo audio system. NOT support DTS Dolby ac-3 and other 5.1ch digital audio.

2. Use the USB cable to connect the power interface of PROZOR DAC converter to the official standard DC 5V/1A power supply.

3. The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. (If the TV supports this feature which depends on the TV itself )

Other Operational Issues

The product does not work and there is no sound

Check if the power light is working properly – if it is, set device such as HD TV, TV BOX, or game console into PCM audio before using NOT support DTS Dolby ac-3 and other 5.1ch digital audio PCM Setting Path: Device homepage → system setting → image and sound → sound setting → digital audio output → PCM

If the light is not on, check if the power cord is properly plugged in, and use a 5V 1A power adapter to connect a USB cable to power the DAC

Noise occurs during product operation

Use the TV USB port to Charge this DAC converter will cause noise

Notice: The optical cable and USB power cable are placed together in a tray inside the box. Please check out carefully when opening the box.

(Power Adapter NOT INCLUDED) Please power this converter via 5V 1A Power Adapter

Use the TV USB port to Charge this DAC converter will cause noise

Why is there suddenly no sound in the left and right channels?

Check and make sure the RCA interfaces are connected well. Or use the other RCA cable

Please power this converter via 5V 1A PLUG, which make sure this DAC converter has enough power and avoid noise

WIll PROZOR DAC work to connect sound bar to smart tv?

1.lnput end of converter connects to a device with optical or coaxial interface and supports PCM audio format output.

2.Connect RCA or 3.5mmm audio jack to the output.

3.Smart tv – Optical or Coaxial Cable – DAC – 3.5mm or RCA Cable – Sound Bar.

ls it compatible with Youtube or Netflix?

NOT cormpatible with Youtube or Netflix. Can work well with Blu-ray Plaver, HD DVD, TV Box, Gare Consoles, HDTV etc

Why does the product produce noise when used?

1) Please set the audio output format of the device to PCM in advance, otherwise the output device is only noisy

2) Use the TV USB port to Charge this DAC converter will cause noise

Why can’t I control the volume through the remote control?

The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. (If the TV supports this feature which depends on the TV itself )

PROZOR DAC Converter

• PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed)
• Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack; Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included); Do Not Use Other Plugs, It Can Only Use 5V 1A Plug
• Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz; 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels
• Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output; Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）
• Easy to Install and Simple to Operate; Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc
• The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. (If the TV supports this feature which depends on the TV itself ) The TV optical output volume can be adjusted on the Settings of the TV system. For example, one of SONY’s TV setting path: Settings → sound Settings → advanced Settings → all → digital audio output volume.
• Electrical noises/Audio delay? Electrical noises: The DAC only supports PCM input format, other formats will cause noise Audio delay: Do not use RCA lines longer than 10 meters