Description

From the brand

From the manufacturer

EB-10 Preamp // EQ // Boost

A tone tweakers delight, the EB-10 works as a preamp, EQ and boost to meticulously craft your guitar’s sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Shape Your Tone with the EB-10

Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn’t know your guitar or bass even had.

Controls

EB-10 EQ The EQ section of the EB-10 offers a wide range of adjustability. Each rotary knob has four positions of cut and boost available. Whether you are cutting or boosting is determined by the direction of the associated toggle switch. This makes for a total of 9 positions for each EQ band. The positions were carefully tuned to effect your signal in 3dB increments offering accurate control over how you filter your signal. Low Band The low band of the EB-10 is controlled by the “LOW” knob and toggle. To shape the low frequency content of your signal, first chose cut or boost with the “LOW” toggle switch – up is boost, down is cut. Then, turn the knob to the desired amount of cut or boost. Boosting lows can help add body to thinner pickups like single coils. Cutting lows can bring clarity to muddier pickups like some humbuckers. Mid Band The mid band of the EB-10 is fully parametric. It’s controlled by the “MID” knob and toggle, as well as three internal trim pots. The knob and toggle give you control over the amount of boost and cut of mid frequency content, and the internal trim pots let you adjust the center frequency and bandwidth of the filter. High Band The high band of the EB-10 is controlled by the “HI” knob and toggle. To shape the high frequency content of your signal, first chose cut or boost with the “HI” toggle switch – up is boost, down is cut. Then, turn the knob to the desired amount of cut or boost. Boosting highs can add sparkle to darker guitars, and cutting highs will tame harsher pickups. Boost Switch The Boost switch engages a 10db MOSFET boost. When it is on, the LED on the switch and the “B” LED will light up. The boost can be really helpful when switching between high and low output guitars without having to do much adjustment to your rig. It is also great for pushing solos to the front of the mix and adding a touch of color to your tone. Operating Modes The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch.

• Works as a preamp, EQ and boost with three available presets to meticulously craft your guitar’s sound
• Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set
• When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch
• Used to compensate when switching between low and high output instruments
• Power requirements: 9VDC, center negative (100mA minimum)